Zebra Printer Configuration: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
<u>Zebra | [[File:ZebraSettingsRW.png]] | ||
<u>Zebra RW420</u> | |||
Margins must be 4 by 11 with .12 on the left margin | Margins must be 4 by 11 with .12 on the left margin. | ||
<u>Zebra | <u>Zebra ZQ521 </u> | ||
Marings must be 4 by 18 with .12 on the left margin. | |||
[[File:ZebraSettingsZQ.png]] | [[File:ZebraSettingsZQ.png]] | ||
Sometimes Zebra has multiple printers showing up with (copy 1) and (copy 2) etc so make sure the margins are adjusted on the one that is actually plugged in. Every time you plug the printer into a different USB port it can create a 'copy' in the printer device list. Anytime you swap a different zebra printer out and plug into any USB port it can create a new 'copy' in the printer device list. | Sometimes Zebra has multiple printers showing up with (copy 1) and (copy 2) etc so make sure the margins are adjusted on the one that is actually plugged in. Every time you plug the printer into a different USB port it can create a 'copy' in the printer device list. Anytime you swap a different zebra printer out and plug into any USB port it can create a new 'copy' in the printer device list. | ||
Revision as of 10:26, 9 January 2026
Zebra RW420
Margins must be 4 by 11 with .12 on the left margin.
Zebra ZQ521
Marings must be 4 by 18 with .12 on the left margin.
Sometimes Zebra has multiple printers showing up with (copy 1) and (copy 2) etc so make sure the margins are adjusted on the one that is actually plugged in. Every time you plug the printer into a different USB port it can create a 'copy' in the printer device list. Anytime you swap a different zebra printer out and plug into any USB port it can create a new 'copy' in the printer device list.