Panasonic FZ-G2 Tablet Commands

From TraCS Florida Wiki
Revision as of 10:30, 14 March 2025 by Admin (talk | contribs) (Created page with "The Panasonic FZ-G2 will not work with TraCS in tablet mode. In order to switch modes, you have to run the following command as an administrator in command prompt: reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PriorityControl“ /v ConvertibleSlateMode /t REG_DWORD /d 1 It resolves the issue until you reboot and then the Panasonic FZ-G2 device goes back to tablet mode on its own. For Windows 11 tablet mode is a default setting. Unfortunately there isn't...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Panasonic FZ-G2 will not work with TraCS in tablet mode. In order to switch modes, you have to run the following command as an administrator in command prompt:

reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PriorityControl“ /v ConvertibleSlateMode /t REG_DWORD /d 1

It resolves the issue until you reboot and then the Panasonic FZ-G2 device goes back to tablet mode on its own. For Windows 11 tablet mode is a default setting. Unfortunately there isn't a setting that we have or a way to configure it permanently. 

Turn Table Mode On Or Off In Windows

Retrieved from "https://www.tracsflorida.org/wiki/index.php?title=Panasonic_FZ-G2_Tablet_Commands&oldid=2792"