Topaz Signature Pad

If you would like to use a Topaz Signature pad to add a default signature to TraCS, you must have the software installed on the machine(s) where you will be doing signatures.

Steps are as follows:

1. Install the software that matches your model.

Links to the Topaz Signature Pad installers are below.

Plug-In Installers - https://www.sigpluspro.com/index.html

Bluetooth Installer (BT2 & BTB models) - https://www.sigpluspro.com/sigplus-bluetooth.html

2. Adjust settings for TraCS.

The settings in the TopazSignature.ini file may need to be adjusted in order for the unit to work with TraCS.

The file is here - C:\ProgramData\TraCS\Settings\DLL Settings

Settings for the models that are currently used by some of our TraCS agencies are below.

T-S460-BT2-R

T-S460-HSB-R

TF-S463-HSNB-R

[Signature]

'LCDSize 1=4X3 0=1X5 2=1X5 Simple

LCDSize=2

PromptImage4X3=\Settings\DLL Settings\SignaturePromptScreen.bmp

ConsentImage4X3=\Settings\DLL Settings\SignaturePromptScreenConsent.bmp

PromptImage1X5=\Settings\DLL Settings\SignaturePromptScreen1x5.bmp

ConsentImage1X5=\Settings\DLL Settings\SignaturePromptScreen1x5.bmp

3. Plug the unit into the computer and log into TraCS.

4. Follow the steps on this page, except in Step 2, choose Tablet Signature.